A237R Resilmount Sound Isolation Clip

Description

Application:
Resilmount A237R™ are an engineered, patented acoustic resilient mounting bracket for Studco furring channels, for reducing airborne vibration and structure-borne vibration in wall and ceiling applications.
Features:
Engineered thermoplastic rubber outperforms standard rubber because of its sound absorbing characteristics.
A237R can be used with any wood, steel, CMU or concrete application.
A237R decouples gypsum board from the structure.
A237R is UL approved in 84 wall and ceiling assemblies.
Consistent and reliable - manufactured under ISO 9001 quality control system.
Resilmount is the most cost effective way to isolate airborne noise.
A237R clips can be used to suit 7/8" and 1-1/2" furring channels.
A237R are provided with a 1/4" hole for a variety of fasteners.
Dynamic Characteristics:
Resilmounts patented thermoplastic rubber outperforms standard rubber because of its unique natural absorbing characteristics. Resilmounts unique sound cell design guards against structure borne vibrations transferring into the body of the resilmount because of its strong column design providing a small percentage of contact surface area with the structure or substrate it is fastened to. This aids in absorbing and breaking up airborne sound at its transfer point.
Installation:
A237R to be fastened to structure with a minimum #8 screw or masonry sleeve anchors.
Load capacity: 55lbs. maximum dead load.
Maximum spacing of clips on furring channel is 48".
Spacing between furring channels should not exceed 24".
Must use A-300 washer in fire rated assemblies (included).